Excellent Wood Floor Re-Oiling in London

In the last couple of years, it was popular a finish to be applied to the wooden flooring, which has a glossy hue. This was very widespread because the clients were searching for such an effect. The polishes then were applied not only for the protection of the flooring but also for its more shiny vision. But recently customers have wished to have a more natural, realistic look. And because of this, the gloss effect of the wax is reduced. Nowadays, the search effect is old, an antique vision of the floor. This effect could be reached with the application of oil.

If you want to keep the natural look of the flooring, then the best you can do is to use oil on it. It will look a little bit ancient. If you have recently installed yours, and you want to achieve this old-fashioned interior, this is the best option in this case. If you re-oil your flooring, the oil will penetrate the upper layer and it will be more resistant to scratches and damages. The other advantages of the oil are that it protects the floor, the maintenance is simple and if well maintained, it does not need to be sanded too often.

The oil finish retains the warm and stylish vision of the floor. It is especially preferred by lovers of eco products because when the oil evaporates, it does not emit dangerous substances. You should be aware that once treated with oil, the flooring needs to be re-oiled every three years. Be sure that you find expert professionals who know their work in detail and work with dedication and great quality. Floor Sanding Professionals is one correct choice, call us on 020 70360622 and we will be glad to work with you.

We will explain the steps for re-oiling your wooden flooring:

• We will send it with sandpaper with a lower grit. In this way, the grain will become loose and will allow the penetration of the oil.
• We will clean it afterwards, to remove all the dust from the sanding
• After this follows cleaning with a mop, with appropriate detergent
• The humidity of the flooring needs to be measured before the oil is applied. It has to be dry to be applied.
• All the information, given by the oil’s manufacturer has to be taken into account, to get a good final result.
• We will remove the extra quantity of oil
• After it dries, we will add another film of oil, so that the surface will become much more resistant.

Following these steps, we can assure you will have nice-looking flooring. Do not hesitate to contact us for future maintenance, as well.